Home › TRANSMISSION ยท U441E AUTOMATIC TRANSAXLE › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT OIL PUMP OIL SEAL


C081416E01
  1. Coat a new oil seal lip with MP grease.

  1. Using SST and a hammer, drive in a new oil seal.

    SST
    09223-00010  

    Drive in depth:
    -0.085 to 0015 mm (-0.0335 to 0.0059 in.)



2. INSTALL FRONT OIL PUMP DRIVEN GEAR


C059989
  1. Coat the front oil pump driven gear with Toyota Genuine ATF Type T-IV, and install it onto the oil pump body.



3. INSTALL FRONT OIL PUMP DRIVE GEAR


C059808
  1. Coat the front oil pump drive gear with Toyota Genuine ATF Type T-IV, and install it onto the oil pump body.



4. INSTALL STATOR SHAFT ASSEMBLY


C059807
  1. Align the stator shaft with the bolt holes.

  1. Install the 8 bolts.

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }



5. INSPECT OIL PUMP ASSEMBLY


C059941
  1. Using 2 screwdrivers, make sure that the drive gear turns smoothly.



6. INSTALL FRONT OIL PUMP BODY O-RING


C067790
  1. Coat a new front oil pump body O-ring with Toyota Genuine ATF Type T-IV, and install it onto the oil pump.