INPUT SHAFT > INSPECTION |
| 1. INSPECT DIRECT CLUTCH DISC |
![]() |
Check the linings of all the clutch discs.
| 2. REMOVE DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() |
Using vernier calipers, measure the free length of the spring together with the spring seat.
| 3. REMOVE DIRECT CLUTCH PISTON SUB-ASSEMBLY |
![]() |
Make sure that the check ball moves freely by shaking the piston.
Check that the valve does not leak by covering the check hole with a finger and applying low pressure compressed air as shown in the illustration.