INTERMEDIATE SHAFT > DISASSEMBLY |
| 1. REMOVE REVERSE CLUTCH DISC |
![]() |
Using a screwdriver, remove the snap ring.
Remove the flange, 2 discs and 2 plates from the intermediate shaft.
| 2. REMOVE FRONT CLUTCH CLUTCH DISC |
![]() |
Using a screwdriver, remove the snap ring.
Remove the flange, 4 plates and 4 discs from the intermediate shaft.
| 3. REMOVE CLUTCH BALANCER NO. 1 |
![]() |
Using SST, a press and snap ring pliers, remove the snap ring.
Remove clutch balancer No. 1 from the intermediate shaft.
| 4. REMOVE FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() |
Remove the forward clutch return spring from the intermediate shaft.
| 5. REMOVE FORWARD CLUTCH PISTON |
![]() |
Apply compressed air to the transaxle rear cover to remove the forward clutch piston.
| 6. REMOVE CLUTCH DRUM SUB-ASSEMBLY |
![]() |
Apply compressed air to the transaxle rear cover to remove the clutch drum.
| 7. REMOVE FORWARD CLUTCH PISTON O-RING |
![]() |
Using a screwdriver, remove the forward clutch piston O-ring from the intermediate shaft.
| 8. REMOVE FRONT CLUTCH DRUM O-RING |
![]() |
Using a screwdriver, remove the front drum O-ring from the clutch drum.
| 9. REMOVE INTERMEDIATE SHAFT OIL SEAL RING |
![]() |
Using a screwdriver, remove the intermediate shaft oil seal ring from the intermediate shaft.