Home › TRANSMISSION ยท U441E AUTOMATIC TRANSAXLE › TRANSAXLE REAR COVER

TRANSAXLE REAR COVER > DISASSEMBLY

for Preparation Click here



1. REMOVE OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY


D008358
  1. Using SST and a press, compress the overdrive brake return spring.

    SST
    09387-00070  
    09950-70010   (09951-07100)

  1. Using a screwdriver, remove the snap ring and overdrive brake return spring.



2. REMOVE 2ND COAST AND OVERDRIVE BRAKE PISTON


C059815
  1. Remove the 2nd coast and overdrive brake piston from the transaxle rear cover with compressed air.



3. REMOVE 2ND COAST AND OVERDRIVE O-RING


C060019
  1. Using a screwdriver, remove the 2 2nd coast and overdrive O-rings from the 2nd coast and overdrive brake piston.



4. REMOVE CLUTCH DRUM OIL SEAL RING


C059816
  1. Remove the 2 clutch drum oil seal rings from the transaxle rear cover.



5. REMOVE TRANSAXLE REAR COVER PLUG


C059819
  1. Remove the 4 transaxle rear cover plugs from the transaxle rear cover.

  1. Using a screwdriver, remove the O-rings from the transaxle rear cover plug.