Home › TRANSMISSION ยท U441E AUTOMATIC TRANSAXLE › TRANSAXLE REAR COVER

TRANSAXLE REAR COVER > REASSEMBLY

for Preparation Click here



1. INSTALL TRANSAXLE REAR COVER PLUG


C059819
  1. Coat 4 new O-rings with Toyota Genuine ATF Type T-IV, and install them onto the transaxle rear cover plug.

  1. Install the 4 transaxle rear cover plugs onto the transaxle rear cover.

    Torque:
    7.4 N*m{ 75 kgf*cm , 65 in.*lbf }



2. INSTALL CLUTCH DRUM OIL SEAL RING


D025205E01
  1. Compress the oil seal ring from both sides to reduce dimension A.

    Dimension A:
    5.0 mm (0.197 in.)

  1. Coat the 2 oil seal rings with Toyota Genuine ATF Type T-IV, and install them onto the transaxle rear cover.



3. INSTALL 2ND COAST AND OVERDRIVE O-RING


C060019
  1. Coat 2 new 2nd coast and overdrive O-rings with Toyota Genuine ATF Type T-IV, and install them onto the 2nd coast overdrive brake piston.



4. INSTALL 2ND COAST AND OVERDRIVE BRAKE PISTON


C060025
  1. Coat the 2nd coast and overdrive brake piston with Toyota Genuine ATF Type T-IV, and install it onto the transaxle rear cover.



5. INSTALL OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY


D008358
  1. Coat the overdrive brake return spring with Toyota Genuine ATF Type T-IV, and install it onto the transaxle rear cover.

  1. Using SST and a press, shorten the overdrive brake return spring, then install the snap ring.

    SST
    09387-00070  
    09950-70010   (09951-07100)