Home › RESTRAINTS › SEAT BELT › FRONT PASSENGER SEAT BELT WARNING LIGHT (for Hatchback)

FRONT PASSENGER SEAT BELT WARNING LIGHT (for Hatchback) > INSTALLATION

for Preparation Click here


HINT:
The procedure described below is for the LHD. Use the same procedure for both the RHD and LHD, unless otherwise specified.



1. INSTALL FRONT PASSENGER SEAT BELT WARNING LIGHT


    B114416
  1. Engage the 2 claws and install the front passenger seat belt warning light.



2. INSTALL INSTRUMENT PANEL FINISH PANEL END


E107743
  1. with CD player

    1. Connect the connector.

    2. Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.



    E107744
  1. Except CD player

    1. Connect the connector.

    2. Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }