Home › RESTRAINTS › SEAT BELT › FRONT PASSENGER SEAT BELT WARNING LIGHT (for Hatchback)

FRONT PASSENGER SEAT BELT WARNING LIGHT (for Hatchback) > INSPECTION

for Preparation Click here


HINT:
The procedure described below is for the LHD. Use the same procedure for both the RHD and LHD, unless otherwise specified.



1. INSPECT FRONT PASSENGER SEAT BELT WARNING LIGHT


    B114549E02
  1. Check the operation.

    1. w/ Airbag Cut off Switch:

      1. Apply battery voltage to the terminals and check that the indicator illuminates.

      Standard:
      Condition
      Standard
      Positive battery - Terminal 6 (lG+)
      Negative battery - Terminal 1 (PBELT)
      Illuminates

      If the result is not as specified, replace the front passenger seat belt warning light.



    2. B114417E01
    3. w/o Airbag Cut off Switch:

      1. Apply battery voltage to the terminals and check that the indicator illuminates.

      Standard:
      Condition
      Standard
      Positive battery - Terminal 1 (lG+)
      Negative battery - Terminal 3 (PBELT)
      Illuminates

      If the result is not as specified, replace the front passenger seat belt warning light.