Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for Hatchback LH Side)

REAR SEAT INNER BELT ASSEMBLY (for Hatchback LH Side) > INSTALLATION

for Preparation Click here


NOTICE:
Always use "TORX" socket wrench E10 when installing the rear seat.



1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B114648E01
  1. Install the rear seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not place the anchor plate over the convex area of the rear seat back frame.

  1. Install the belt into the band.



    B114740E01
  1. Install the rear seat cushion.

  1. Using "TORX" socket wrench E10, tighten the 3 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



2. INSTALL NO. 2 REAR SEAT LEG COVER


    B114739
  1. Engage the 3 claws and install the No. 2 rear seat leg cover.



3. INSTALL NO. 1 REAR SEAT LEG COVER


    B114738
  1. Engage the 4 claws and install the No. 1 rear seat leg cover.