REAR CENTER SEAT INNER BELT ASSEMBLY (for Hatchback RH Side) > REMOVAL |
| 1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim) |
![]() |
Remove the 2 package tray trim suspenders.
Remove the 5 pieces of hook tape.
Disengage the 2 claws and remove the package tray trim.
| 2. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board) |
![]() |
Release the 2 knobs and remove the deck board.
| 3. REMOVE SPARE WHEEL COVER ASSEMBLY (w/ Deck Board) |
![]() |
Remove the spare wheel cover.
| 4. REMOVE DECK FLOOR BOX (w/ Deck Board) |
![]() |
Release the 2 knobs and remove the deck floor box.
| 5. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board) |
![]() |
Remove the rear floor carpet.
| 6. REMOVE NO. 1 REAR SEAT LEG COVER |
![]() |
Disengage the 4 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.
| 7. REMOVE NO. 2 REAR SEAT LEG COVER |
![]() |
Disengage the 3 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.
| 8. REMOVE REAR SEAT ASSEMBLY |
![]() |
Using "TORX" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.
![]() |
Using "TORX" socket wrench E10, remove the 4 bolts and the rear seat.
| 9. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY |
![]() |
for 3 Point Type Rear Center Seat Belt:
Remove the bolt and the rear center seat inner belt.
![]() |
for 2 Point Type Rear Center Seat Belt:
Remove the tongue plate.
Remove the bolt and the rear center seat inner belt.