Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER NOZZLE (for Hatchback)

WASHER NOZZLE (for Hatchback) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT WASHER NOZZLE
  1. Start the engine.



  1. Check where the washer fluid hits the windshield.

    Standard:
    Washer fluid hits the windshield in the areas shown in the illustration.




    1. Front:


      E114462E01

      Specification:
      Area
      Measurement
      A
      115 mm (4.53 in.)
      B
      100 mm (3.94 in.)
      C
      375 mm (14.76 in.)
      D
      85 mm (3.35 in.)
      E
      454 mm (17.87 in.)
      F
      88 mm (3.46 in.)
      G
      178 mm (7.01 in.)
      H
      31 mm (1.22 in.)



    2. Rear:


      E108417E01

      Specification:
      Area
      Measurement
      A
      100 mm (3.94 in.)
      B
      100 mm (3.94 in.)