Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER NOZZLE (for Sedan)

WASHER NOZZLE (for Sedan) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT WASHER NOZZLE
  1. Start the engine.



  1. Check where the washer fluid hits the windshield.

    Standard:
    Washer fluid hits the windshield in the areas shown in the illustration.



    E127795E01

    Specification:
    Area
    Measurement
    A
    26.6 mm (1.05 in.)
    B
    29.2 mm (1.15 in.)
    C
    426.2 mm (16.78 in.)
    D
    79.9 mm (3.15 in.)
    E
    427.8 mm (16.84 in.)
    F
    234.5 mm (9.23 in.)
    G
    234.8 mm (9.24 in.)