Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH (for Hatchback Center Console Side)

DOOR CONTROL SWITCH (for Hatchback Center Console Side) > INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH


B118048
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      3 - 5
      Locked
      10 kΩ or higher
      3 - 5
      Unlocked
      Below 1 Ω
      4 - 5
      Locked
      Below 1 Ω
      4 - 5
      Unlocked
      10 kΩ or higher
      1 - 6
      Illumination Circuit
      Below 1 Ω

      If the result is not as specified, replace the door control switch.

  1. Check the illumination operation.

    1. Connect the positive (+) battery lead to terminal 6 and the negative (-) battery lead to terminal 1, then check that the illumination illuminates.

      OK:
      Illumination illuminates.

      If the illumination does not illuminate, replace the door control switch.