Home › BODY ELECTRICAL › DOOR LOCK › UNLOCK WARNING SWITCH

UNLOCK WARNING SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER


    C139093E01
  1. Remove the 3 screws, disengage the 2 claws, release the tilt lever and remove the steering column lower cover.



    C139094E01
  1. Disengage the claw and remove the steering column upper cover.



2. REMOVE UN-LOCK WARNING SWITCH ASSEMBLY


B118054
  1. Insert the key into the ignition key cylinder.

  1. Disconnect the connector.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the unlock warning switch.