REAR POWER WINDOW SWITCH (for Hatchback) > INSTALLATION |
| 1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR |
![]() |
Engage the set plate and install the power window regulator switch.
| 2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
![]() |
Connect the rear door lock remote control cable and rear door inside locking cable.
Connect the connector.
![]() |
Engage the 7 clips and install the rear door trim board.
![]() |
Tighten the 2 screws.
![]() |
Engage the 3 claws and install the rear door armrest plug.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |