Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Sedan Fixed Seat Type)

REAR SEAT ASSEMBLY (for Sedan Fixed Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEATBACK ASSEMBLY


    B134981
  1. Engage the 3 hooks and install the rear seatback.

  1. Tighten the 3 bolts.

    Torque:
    7.9 N*m{ 80 kgf*cm , 70 in.*lbf }



    B138450E02
  1. Install the rear seat outer belt into the rear seat shoulder belt guide.

    HINT:
    Use the same procedure for both sides.

  1. for 3 Point Type Rear Center Seat belt:

    1. Install the rear center seat outer belt into the rear center seat shoulder belt guide.



2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B138623
  1. Pass the rear seat inner belt through the rear seat cushion cover pad slit.

  1. Engage the 3 hooks and install the rear seat cushion cover pad.

    NOTICE:
    SE Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.