Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback Bench Seat Type)

REAR SEAT ASSEMBLY (for Hatchback Bench Seat Type) > INSTALLATION

for Preparation Click here


NOTICE:
Always use "TORX" socket wrench E10 when installing the rear seat.



1. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY


    B108443
  1. Install the rear seat cushion leg sub-assembly with the 2 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



2. INSTALL REAR SEAT BACK ASSEMBLY


    B106500E01
  1. Insert the 2 location pins through the 2 body holes and install the rear seat back.

  1. Using "TORX" socket wrench E10, tighten the 4 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



3. INSTALL REAR SEAT CUSHION LOCK HOOK


    B117741
  1. Engage the 4 claws and install the 2 rear seat cushion lock hooks.



4. INSTALL REAR SEAT CUSHION COVER PAD


    B117758
  1. Pass the rear seat inner belt through the slit in the rear seat cushion.

  1. Engage the 3 hooks and install the rear seat cushion.

    NOTICE:
    Make sure that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.



5. INSTALL DECK FLOOR BOX RH


    B106446
  1. Set the deck floor box and lock the 2 knobs.



6. INSTALL DECK FLOOR BOX LH

HINT:
Use the same procedure as for the RH side.



7. INSTALL DECK BOARD SUB-ASSEMBLY


    B106447
  1. Set the deck board and lock the 2 knobs.



8. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    B114569E01
  1. Engage the 2 claws and install the package tray trim panel.

  1. Install the 5 pieces of hook tape.

  1. Install the 2 package tray trim suspenders.