Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Sedan Fixed Seat Type)

REAR SEAT ASSEMBLY (for Sedan Fixed Seat Type) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B138595
  1. Hold the front edge of the rear seat cushion cover pad and lift it up, as shown in the illustration, to disengage the 2 hooks.

    NOTICE:
    Hold the area around the hooks so as to avoid deforming the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit in the rear seat cushion cover pad, disengage the hook between the rear seat cushion cover pad and the rear seatback, and remove the rear seat cushion cover pad.



2. REMOVE REAR SEATBACK ASSEMBLY


    B138450E02
  1. Remove the rear seat outer belt from the rear seat shoulder belt guide.

    HINT:
    Use the same procedure for both sides.

  1. for 3 Point Type Rear Center Seat belt:

    1. Remove the rear center seat outer belt from the rear center seat shoulder belt guide.



    B134981
  1. Remove the 3 bolts.

  1. Disengage the 3 hooks and remove the rear seatback.