Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback Bench Seat Type)

REAR SEAT ASSEMBLY (for Hatchback Bench Seat Type) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat back frame could cause injuries to your hands.



1. REMOVE REAR SEAT HEADREST ASSEMBLY


    B106502E01
  1. Push in the 2 lock buttons of the 2 rear seat headrest supports and remove the 2 rear seat headrests.



2. REMOVE REAR SEAT BACK LOCK STRIKER COVER


    B106503E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rear seat back lock striker cover.



3. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B106504
  1. Remove the 2 screws.

  1. Disconnect the rear seat reclining control cable and remove the rear seat lock control lever.



4. REMOVE REAR SEAT HEADREST SUPPORT


    B117747
  1. Disengage the hook.



    B130395
  1. Unfasten the 2 zippers.



    B108444E01
  1. Disengage the 8 claws and remove the 4 rear seat headrest supports.



5. REMOVE REAR SEAT BACK COVER PAD


    B106508
  1. Remove the rear seat back cover pad.



6. REMOVE REAR SEAT RECLINING COVER RH


    B130399
  1. Remove the screw.

  1. Disengage the 7 claws and remove the rear seat reclining cover.



7. REMOVE REAR SEAT RECLINING COVER LH

HINT:
Use the same procedure as for the RH side.



8. REMOVE RECLINING ADJUSTER LOWER INSIDE COVER RH


    B106510
  1. Using a clip remover, remove the clip and the reclining adjuster lower inside cover.



9. REMOVE RECLINING ADJUSTER LOWER INSIDE COVER LH

HINT:
Use the same procedure as for the RH side.



10. REMOVE REAR SEAT RECLINING CONTROL CABLE


    B130401
  1. Remove the rear seat reclining control cable.



    B130402
  1. Remove the 2 clamps.



11. REMOVE REAR SEAT LEG SUB-ASSEMBLY


    B130403
  1. Remove the 4 bolts and the rear seat leg.