Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback Bench Seat Type)

REAR SEAT ASSEMBLY (for Hatchback Bench Seat Type) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the front seat back frame could cause injuries to your hands.



1. INSTALL REAR SEAT LEG SUB-ASSEMBLY


    B130403
  1. Install the rear seat leg with the 4 bolts.

    Torque:
    44 N*m{ 449 kgf*cm , 33 ft.*lbf }



2. INSTALL REAR SEAT RECLINING CONTROL CABLE


    B130402
  1. Install the 2 clamps.



    B130405E01
  1. Install the rear seat reclining control cable as shown in the illustration.



3. INSTALL RECLINING ADJUSTER LOWER INSIDE COVER RH


    B106510
  1. Install the reclining adjuster lower inside cover with the clip.



4. INSTALL RECLINING ADJUSTER LOWER INSIDE COVER LH

HINT:
Use the same procedure as for the RH side.



5. INSTALL REAR SEAT RECLINING COVER RH


    B130399
  1. Engage the 7 claws and install the rear seat reclining cover.

  1. Tighten the screw.



6. INSTALL REAR SEAT RECLINING COVER LH

HINT:
Use the same procedure as for the RH side.



7. INSTALL REAR SEAT BACK COVER PAD


    B106508
  1. Install the rear seat back cover pad.



    B106506E01
  1. Fasten the 2 zippers.



    B117747
  1. Engage the hook.



8. INSTALL REAR SEAT HEADREST SUPPORT


    B106507E01
  1. Align the protruding portions of the rear seat headrest support with the installation grooves of the rear seat back frame.

  1. Engage the 8 claws and install the 4 rear seat headrest supports.



9. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B106504
  1. Connect the rear seat reclining control cable and install the rear seat lock control lever.

  1. Tighten the 2 screws.



10. INSTALL REAR SEAT BACK LOCK STRIKER COVER


    B108446E01
  1. Engage the 2 claws and install the rear seat back lock striker cover.



11. INSTALL REAR SEAT HEADREST ASSEMBLY


    B106502E01
  1. Push in the 2 lock buttons of the 2 rear seat headrest supports and install the 2 rear seat headrests.