REAR DRUM BRAKE (for Sedan) > INSPECTION |
| 1. INSPECT REAR BRAKE DRUM INSIDE DIAMETER |
![]() |
Using a brake drum gauge or the equivalent, measure the inside diameter of the brake drum.
| 2. INSPECT REAR BRAKE SHOE LINING THICKNESS |
![]() |
Using a ruler, measure the thickness of the shoe lining.
| 3. INSPECT REAR BRAKE DRUM AND REAR BRAKE SHOE LINING FOR PROPER CONTACT |
![]() |
Apply chalk to the inside surface of the drum, then grind the brake shoe lining so that they fit together properly.
If the contact between the drum and the shoe lining is improper, repair it using a brake shoe grinder or replace the brake shoe assembly.
| 4. INSPECT WHEEL BRAKE CYLINDER |