Home › RESTRAINTS › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
By accessing the DATA LIST using the intelligent tester, values of the switches and sensors can be read without removing any parts. Reading the DATA LIST is the first step of troubleshooting and is one method of shortening diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON and turn the tester on.

  3. Read the DATA LIST according to the indication displayed on the tester.

    Combination Meter Assembly 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    P-Seatbelt Buckle SW
    Buckle switch (Front passenger side) /
    ON: Front passenger side seat belt is fastened
    OFF: Front passenger side seat belt is unfastened
    ON/OFF
    -

    Main Body ECU 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    D Seat Buckle SW
    Buckle switch (Driver side) /
    ON: Front driver side seat belt is fastened
    OFF: Front driver side seat belt is unfastened
    ON/OFF
    -


PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSV, actuators and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON and turn the tester on.

  3. Perform the ACTIVE TEST according to the indication displayed on the tester.

    Combination Meter Assembly 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Indicat. Lamp D-seat Belt
    Front driver seat belt warning light / OFF or ON
    -
    Indicat. Lamp P-seat Belt
    Front passenger seat belt warning light / OFF or ON
    -