Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG CUT-OFF SWITCH (for Hatchback)

AIRBAG CUT-OFF SWITCH (for Hatchback) > INSPECTION

for Preparation Click here



1. INSPECT AIRBAG CUT-OFF SWITCH


H100191E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminal.

      Standard resistance:
      Switch Condition
      Tester Connection
      Specified Condition
      OFF
      1(PMC-) - 2(PMC+)
      80 to 120Ω
      ON
      1(PMC-) - 2(PMC+)
      320 to 480Ω

      If the result is not as specified, replace the airbag cut-off switch.