Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › HEATER BLOWER MOTOR RELAY (for Hatchback)

HEATER BLOWER MOTOR RELAY (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL HEATER BLOWER MOTOR RELAY


I101538
  1. Install the heater blower motor relay.



2. INSTALL INSTRUMENT PANEL BOX (for LHD)


B108189E01
  1. Insert the stopper of the instrument panel box from the cutout of the instrument panel lower.

  1. Engage the 2 hinges with the instrument panel open.

  1. Close the instrument panel box.



3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)


B105352
  1. Engage the claw of the hinge portion in the horizontal direction to install the glove compartment door assembly.

    NOTICE:
    Engage the claw in the horizontal direction, otherwise, installation failure caused by excessive play around the hinge portion will result.



    B108202
  1. Slightly deform the upper portion of the glove compartment door assembly to engage the stopper.