Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › HEATER BLOWER MOTOR RELAY (for Hatchback)

HEATER BLOWER MOTOR RELAY (for Hatchback) > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL BOX (for LHD)


B108188E01
  1. Open the instrument panel box.

  1. Pull the hinge side of the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.

  1. Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.



2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)


B108202
  1. Slightly deform the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door assembly until it becomes horizontal.



    B105351
  1. Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door assembly.

    NOTICE:
    Pull the glove compartment door out horizontally, otherwise, installation failure caused by excessive play around the hinge portion will result.



3. REMOVE HEATER BLOWER MOTOR RELAY


I101538
  1. Remove the heater blower motor relay.