Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER (for Hatchback)

RADIO RECEIVER (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 RADIO BRACKET


E116768
  1. w/ Cassette Tape Player:

    1. Install the radio bracket and the radio receiver panel with the 4 screws.



    E107792
  1. w/ CD Player:

    1. Install the radio bracket with the 4 screws.



2. INSTALL NO. 2 RADIO BRACKET


E116768
  1. w/ Cassette Tape Player:

    1. Install the radio bracket and the radio receiver panel with the 4 screws.



    E107791
  1. w/ CD Player:

    1. Install the radio bracket with the 4 screws.



3. INSTALL RADIO RECEIVER ASSEMBLY


E116762
  1. w/ Cassette Tape Player:

    1. Connect the connectors.

    2. Install the radio receiver with the 4 screws.



    I101590
  1. w/ CD Player:

    1. Connect the connectors.

    2. Engage the 4 clips and 2 claws and install the radio receiver.

    3. Install the 4 screws.



4. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY (w/ Cassette Tape Player)


E116764
  1. Engage the 4 clips and 2 claws and install the instrument cluster finish panel.



5. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1


B132366E01
  1. Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.



    B132367
  1. Engage the 4 claws and 5 clips and install the instrument cluster finish panel.



6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


E107743
  1. with CD player

    1. Connect the connector.

    2. Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.



    E107744
  1. Except CD player

    1. Connect the connector.

    2. Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.



7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


E107741
  1. with CD player

    1. Connect the connector.

    2. Engage the 4 claws and 3 clips and install the instrument panel finish panel end LH.



    E107742
  1. Except CD player

    1. Connect the connector.

    2. Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }