FRONT AXLE HUB (for Hatchback) > DISASSEMBLY |
| 1. REMOVE FRONT AXLE HUB HOLE SNAP RING |
![]() |
Using snap ring pliers, remove the hole snap ring.
| 2. REMOVE FRONT AXLE HUB SUB-ASSEMBLY |
![]() |
Fix the steering knuckle in a vise between aluminum plates.
Using SST, remove the axle hub.
![]() |
Using SST, remove the hub bearing inner race from the axle hub.
| 3. REMOVE FRONT DISC BRAKE DUST COVER |
![]() |
Remove the dust cover by tapping the back side with a brass bar and hammer.
| 4. REMOVE FRONT AXLE HUB BEARING |
![]() |
Install the removed hub bearing inner race onto the outer side of the hub bearing.
Using SST and a press, remove the hub bearing from the steering knuckle.