Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB (for Sedan)

FRONT AXLE HUB (for Sedan) > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT AXLE HUB HOLE SNAP RING


C112582
  1. Using snap ring pliers, remove the hole snap ring.

    NOTICE:
    When removing the hole snap ring, do not damage the magnetic rotor surface.



2. REMOVE FRONT AXLE HUB SUB-ASSEMBLY


C057871E01
  1. Fix the steering knuckle in a vise between aluminum plates.

    NOTICE:
    Do not overtighten the vise.

  1. Using SST, remove the axle hub.

    SST
    09520-00031  



    G031908E01
  1. Using SST, remove the hub bearing inner race from the axle hub.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
    09950-60010   (09951-00370)



3. REMOVE FRONT DISC BRAKE DUST COVER


C116902
  1. Remove the dust cover by tapping the back side with a brass bar and hammer.



4. REMOVE FRONT AXLE HUB BEARING


C112580E01
  1. Install the removed hub bearing inner race onto the outer side of the hub bearing.

  1. Using SST and a press, remove the hub bearing from the steering knuckle.

    SST
    09223-15020  
    09387-02010  
    09950-60010   (09951-00630)
    09950-70010   (09951-07100)