REAR AXLE HUB BOLT (for Hatchback) > INSTALLATION |
| 1. INSTALL REAR AXLE HUB BOLT |
![]() |
Install the washer and the nut onto a new hub bolt as shown in the illustration.
Using a screwdriver or the equivalent to hold the hub and bearing, install the hub bolt by tightening the nut.
| 2. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY |
| 3. ADJUST REAR DRUM BRAKE SHOE CLEARANCE |
![]() |
Provisionally install the 2 hub nuts.
Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
Using a screwdriver, release the adjuster 12 notches.
Install the hole plug.
| 4. INSTALL REAR WHEEL |