Home › SUSPENSION & AXLE › AXLE › REAR AXLE HUB BOLT (for Sedan)

REAR AXLE HUB BOLT (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL REAR AXLE HUB BOLT


C121819E01
  1. Install the washer and the nut onto a new hub bolt as shown in the illustration.

  1. Using a screwdriver or the equivalent to hold the hub and bearing, install the hub bolt by tightening the nut.



2. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY


3. ADJUST REAR DRUM BRAKE SHOE CLEARANCE


F040023E03
  1. Provisionally install the 2 hub nuts.

  1. Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

  1. Using a screwdriver, release the adjuster 12 notches.

  1. Install the hole plug.



4. INSTALL REAR WHEEL

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }