Home › SUSPENSION & AXLE › AXLE › REAR AXLE HUB BOLT (for Sedan)

REAR AXLE HUB BOLT (for Sedan) > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
  1. Release the parking brake and remove the rear brake drum.
    If the rear brake drum cannot be removed easily, perform the following procedure.



    F046068E02
  1. Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

  1. Using another screwdriver, contract the brake shoe by turning the adjusting bolt.



3. REMOVE REAR AXLE HUB BOLT


C121818
  1. Using SST and a screwdriver or the equivalent, remove the hub bolt.

    SST
    09611-12010