DOOR CONTROL SWITCH (for Hatchback Driver Door Side) > INSPECTION |
| 1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD) |

Check the resistance of the door lock switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 2 | LOCK | Below 1 Ω |
| - | OFF | 10 kΩ or higher |
| 1 - 9 | UNLOCK | Below 1 Ω |
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 7 | LOCK | Below 1 Ω |
| - | OFF | 10 kΩ or higher |
| 7 - 9 | UNLOCK | Below 1 Ω |
| 2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD) |

Check the resistance of the door lock switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 9 | LOCK | Below 1 Ω |
| - | OFF | 10 kΩ or higher |
| 8 - 9 | UNLOCK | Below 1 Ω |
| Tester Connection | Switch Condition | Specified Condition |
| 1 - 7 | LOCK | Below 1 Ω |
| - | OFF | 10 kΩ or higher |
| 7 - 9 | UNLOCK | Below 1 Ω |