Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH (for Sedan)

DOOR CONTROL SWITCH (for Sedan) > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD)


B141911E01
  1. Check the resistance of the door control switch.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - 2
      LOCK
      Below 1 Ω
      1 - 2
      OFF
      10 kΩ or higher
      1 - 9
      OFF
      10 kΩ or higher
      1 - 9
      UNLOCK
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.



2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD)


B141912E01
  1. Check the resistance of the door control switch.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - 9
      LOCK
      Below 1 Ω
      1 - 9
      OFF
      10 kΩ or higher
      8 - 9
      OFF
      10 kΩ or higher
      8 - 9
      UNLOCK
      Below 1 Ω

      If the result is not as specified, replace the power window regulator master switch.