Home › BODY ELECTRICAL › LIGHTING › LIGHTING SYSTEM

LIGHTING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Read the DATA LIST according to the prompts displayed on the tester.

    Main Body ECU: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    D Dor Cty SW
    Driver door courtesy switch signal/ ON or OFF
    ON: Front driver door open
    OFF: Driver door closed
    -
    P Dor Cty SW
    Front passenger door courtesy switch signal/ ON or OFF
    ON: Front passenger door open
    OFF: Front passenger door closed
    -
    RR Dor Cty SW*1
    Rear door RH courtesy switch signal/ ON or OFF
    ON: Rear door RH open
    OFF: Rear door RH closed
    -
    RL Dor Cty SW*1
    Rear door RL courtesy switch signal/ ON or OFF
    ON: Rear door RL open
    OFF: Rear door RL closed
    -
    Back Dor Cty SW*2
    Back door courtesy switch signal/ ON or OFF
    ON: Back door open
    OFF: Back door closed
    -
    Lugg Courtsy SW*3
    Luggage compartment door courtesy switch signal/ ON or OFF
    ON: Luggage compartment door open
    OFF: Luggage compartment door closed
    -
    *1: 5 Door and sedan
    *2: Hatchback
    *3: Sedan


PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSV, actuators and other item to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Perform the ACTIVE TEST according to the prompts displayed on the tester.

    Main Body ECU: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Illumi Output
    Illuminated Entry System ON/OFF
    -
    Hazard
    Hazard ON/OFF
    -