BRAKE MASTER CYLINDER (for Hatchback LHD) > REMOVAL |
| 1. DRAIN BRAKE FLUID |
| 2. REMOVE BATTERY |
| 3. REMOVE BATTERY TRAY |
| 4. REMOVE BATTERY CARRIER |
| 5. DISCONNECT CLUTCH RESERVOIR TUBE (for Manual Transaxle) |
![]() |
Slide the clip and disconnect the reservoir tube.
| 6. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY |
Disconnect the brake fluid level warning switch connector.
![]() |
w/o ABS:
Using SST, separate the 3 brake tubes from the brake tube way.
![]() |
Using SST, separate the 2 brake tubes from the brake master cylinder sub-assembly.
![]() |
w/ ABS:
Remove the 2 nuts and remove the brake master cylinder sub-assembly.
![]() |
w/o ABS:
Remove the 2 nuts and brake tube way and remove the brake master cylinder sub-assembly.
Remove the O-ring from the brake master cylinder sub-assembly.