BRAKE MASTER CYLINDER (for Hatchback RHD) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DRAIN BRAKE FLUID |
| 3. DISCONNECT CLUTCH RESERVOIR TUBE (for Manual Transaxle) |
![]() |
Slide the clip and disconnect the reservoir tube.
| 4. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY |
Disconnect the brake fluid level warning switch connector.
![]() |
Using SST, separate the 2 brake tubes from the brake master cylinder sub-assembly.
![]() |
Remove the 2 nuts and remove the brake master cylinder sub-assembly.
Remove the O-ring from the brake master cylinder sub-assembly.