Home › BODY › WINDSHIELD / WINDOWGLASS › DEFOGGER RELAY

DEFOGGER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT MAIN BODY ECU (DEFOGGER RELAY)


B121544E01
  1. Remove the DEF fuse.

  1. Using an ohmmeter, measure the resistance between the terminals of the DEF fuse.

    Standard Resistance:
    Below 1 Ω

  1. Install the DEF fuse.

  1. Using an ohmmeter, measure the resistance between terminals 4Q-12 and 4Q-4 of the main body ECU connector.

    Standard Resistance:
    Below 1 Ω

  1. Turn the ignition switch on (IG).

  1. Turn the defogger switch ON.

  1. Using a voltmeter, measure the voltage between terminal 4F-2 of the main body ECU connector and body ground.

    Standard Voltage:
    10 to 14 V