Home › ENGINE ยท 1NZ-FE › STARTING › ACC CUT RELAY

ACC CUT RELAY > INSTALLATION

for Preparation Click here



1. INSTALL ACC CUT RELAY


A115436
  1. Install the ACC cut relay.



2. INSTALL INSTRUMENT PANEL BOX (for Hatchback LHD)


B108189E01
  1. Insert the stopper of the instrument panel box from the cutout of the instrument panel lower.

  1. Engage the 2 hinges with the instrument panel open.

  1. Close the instrument panel box.



3. INSTALL INSTRUMENT PANEL BOX (for Sedan LHD)
  1. Insert the stopper of the instrument panel box from the cutout of the instrument panel lower.



    B176559
  1. Engage the 2 hinges with the instrument panel open.

  1. Close the instrument panel box.



4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Hatchback RHD)


B105352
  1. Engage the claw of the hinge portion in the horizontal direction to install the glove compartment door assembly.

    NOTICE:
    Engage the claw in the horizontal direction, otherwise, installation failure caused by excessive play around the hinge portion will result.



    B108202
  1. Slightly deform the upper portion of the glove compartment door assembly to engage the stopper.



5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Sedan RHD)


B132321E01
  1. Engage the claws of the hinge portions by pushing the glove compartment door in the horizontal direction to install the glove compartment door assembly.

    NOTICE:
    Engage the claw by pushing it in the horizontal direction, otherwise, installation failure caused by excessive play around the hinge portion will result.



    B132319E01
  1. Slightly flex the upper portion of the glove compartment door assembly to engage the stopper.

  1. Install the glove compartment door stopper onto the glove compartment door.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }