ACC CUT RELAY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL BOX (for Hatchback LHD) |
![]() |
Open the instrument panel box.
Pull the hinge side of the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.
Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.
| 3. REMOVE INSTRUMENT PANEL BOX (for Sedan LHD) |
![]() |
Open the instrument panel box.
Pull the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.
![]() |
Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.
| *1 | Stopper |
| *a | Cutout |
| 4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for Hatchback RHD) |
![]() |
Slightly deform the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door assembly until it becomes horizontal.
![]() |
Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door assembly.
| 5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for Sedan RHD) |
![]() |
Disengage the claw and separate the glove compartment door stopper from the glove compartment door.
Slightly flex the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door until it becomes horizontal.
![]() |
Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door.
| 6. REMOVE ACC CUT RELAY |
![]() |
Remove the ACC cut relay.