INTEGRATION RELAY > INSPECTION |
| 1. INSPECT INTEGRATION NO.1 RELAY |
![]() |
Inspect AM2 (15A) fuse.
Disconnect the fuse. Using an ohmmeter, measure the resistance of the fuse.
| Tester Connection | Specified condition |
| 1 - 2 | Below 1 Ω |
Inspect IG2 relay.
Using an ohmmeter, measure the resistance between the terminals.
| Tester Connection | Specified condition |
| B1 - C1 | Below 1 Ω |
| B1 - B4 | Below 1 Ω (Apply battery voltage between terminals B2 and B3) |
| 10 kΩ or higher | |
| B4 - C1 | Below 1 Ω (Apply battery voltage between terminals B2 and B3) |
| 10 kΩ or higher |