Home › ENGINE ยท 2NZ-FE › STARTING › IGNITION RELAY

IGNITION RELAY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE INSTRUMENT PANEL BOX (for Hatchback LHD)


B108188E01
  1. Open the instrument panel box.

  1. Pull the hinge side of the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.

  1. Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.



3. REMOVE INSTRUMENT PANEL BOX (for Sedan LHD)


B176558
  1. Open the instrument panel box.

  1. Pull the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.



    B132335E02
  1. Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.
    Text in Illustration 
    *1
    Stopper
    *a
    Cutout



4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for Hatchback RHD)


B108202
  1. Slightly deform the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door assembly until it becomes horizontal.



    B105351
  1. Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door assembly.

    NOTICE:
    Pull the glove compartment door out horizontally, otherwise, installation failure caused by excessive play around the hinge portion will result.



5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for Sedan RHD)


B132319E01
  1. Disengage the claw and separate the glove compartment door stopper from the glove compartment door.

  1. Slightly flex the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door until it becomes horizontal.



    B132320E01
  1. Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door.

    NOTICE:
    Pull the glove compartment door out horizontally, otherwise, installation failure caused by excessive play around the hinge portion will result.



6. REMOVE IGNITION RELAY


A115437
  1. Remove the ignition relay.