POWER OUTLET SOCKET (for Sedan) > REMOVAL |
| 1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Remove the shift lever knob.
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Shift the shift lever into the N position.
Disengage the 5 clips and the claw and remove the upper console panel.
| 4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Disengage the 3 clips and 3 claws.
Disconnect the connector and remove the console upper rear panel.
| 5. REMOVE POWER OUTLET SOCKET |
![]() |
Using a screwdriver, disengage the claw, then turn the power outlet socket counterclockwise and push the power outlet socket half way out.
![]() |
Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.
| 6. REMOVE POWER OUTLET SOCKET COVER |
![]() |
Disengage the 2 claws and remove the power outlet socket cover.