Home › RESTRAINTS › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > TERMINALS OF ECU

for Preparation Click here



COMBINATION METER ASSEMBLY

B127205E07


E126885E01

  1. Disconnect the D1 combination meter assembly connector.

  2. Measure the voltage and resistance of the wire harness side connector.

    Standard: 
    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D1-1 (IG2) - Body ground
    B - Body ground
    Ignition switch signal
    Ignition switch off → ON
    Below 1 V → 10 to 14 V
    D1-2 (ECUB) - Body Ground
    L - Body Ground
    Battery
    Always
    10 to 14 V
    D1-24 (ET) - Body Ground
    BR - Body Ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction in the wire harness.

  3. Reconnect the combination meter assembly connector.

  4. Measure the voltage of the wire harness side connectors.

    Standard voltage: 
    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D1-20 (CANH) - Body ground
    G -Body ground
    CAN communication line
    Ignition switch ON
    Pulse generation
    D1-21 (CANL) - Body ground
    W -Body ground
    CAN communication line
    Ignition switch ON
    Pulse generation
    D87-9 (PBLT)*1 - Body Ground
    BE - Body Ground
    Front passenger seat belt warning light signal (passenger side)
    Ignition switch ON
    10 to 14 V
    D87-16 (PBLT)*2 - Body Ground
    BE - Body Ground
    Front passenger seat belt warning light signal (passenger side)
    Ignition switch ON
    10 to 14 V
    D84-9 (PBLT)*3 - Body Ground
    O - Body Ground
    Front passenger seat belt warning light signal (passenger side)
    Ignition switch ON
    10 to 14 V
    D1-10 (P/SB) - Body Ground
    BE*4 - Body Ground
    Front seat inner belt assembly signal (passenger side)
    Front passenger seat is occupied and its seat belt is unfastened
    Below 1 V
    O*3 - Body Ground
    D1-10 (P/SB) - Body Ground
    BE*4 - Body Ground
    Front seat inner belt assembly signal (passenger side)
    Front passenger seat is occupied and its seat belt is fastened
    10 to 14 V
    O*3 - Body Ground
    If the result is not as specified, the combination meter assembly may have a malfunction.

    HINT:
    1. *1: Hatchback (LHD)
    2. *2: Hatchback (RHD)
    3. *3: Sedan
    4. *4: Hatchback


MAIN BODY ECU

E114510E11


B108641E45

  1. Disconnect the 4B and 4E main body ECU connectors.

  2. Measure the voltage and resistance of the wire harness side connectors.

    Standard: 
    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    4B-30 (BECU) - 4E-17 (GND1)
    L - W-B
    Battery
    Always
    10 to 14 V
    4E-17 (GND1) - Body Ground
    W-B - Body Ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction in the wire harness.

  3. Reconnect the main body ECU connectors.

  4. Measure the voltage of the wire harness side connectors.

    Standard voltage: 
    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D33-9 (DBKL) - Body Ground
    G*1 - Body Ground
    Front seat inner belt assembly signal (driver side)
    Ignition switch ON
    Tongue plate fastened
    10 to 14 V
    W*2 - Body Ground
    D33-9 (DBKL) - Body Ground
    G*1 - Body Ground
    Front seat inner belt assembly signal (driver side)
    Ignition switch ON
    Tongue plate unfastened
    Below 1 V
    W*2 - Body Ground
    D33-23 (CANH) - Body ground
    R - Body Ground
    CAN communication line
    Ignition switch ON
    Pulse generation
    D33-22 (CANL) - Body ground
    W - Body Ground
    CAN communication line
    Ignition switch ON
    Pulse generation
    4S-15*1 - Body Ground
    Y - Body Ground
    Power supply for front passenger seat belt warning light
    Ignition switch ON
    10 to 14 V
    4S-15*2 - Body Ground
    Y - Body Ground
    Power supply for hazard warning signal switch assembly (front passenger seat belt warning light)
    Ignition switch ON
    10 to 14 V

    HINT:
    1. *1: Hatchback
    2. *2: Sedan

    If the result is not as specified, there may be a malfunction on the wire harness side.