AUDIO AND VISUAL SYSTEM > SYSTEM DESCRIPTION |
| DISC PLAYER OUTLINE |
A CD player uses a laser pickup to read digital signals recorded on CDs. By converting the digital signals to analog, music and other content can be played.
Usable discs
The CD player can only play audio CDs, CD-Rs (CD-Recordable), and CD-RWs (CD-ReWritable) that have any of the following marks:

Precautions for use of discs
Cleaning
![]() |
If dirt is on the disc surface, wipe it clean with a soft dry cloth, such as an eyeglass cleaner for plastic lenses, from the inside to the outside in a radial direction.
| MP3/WMA OUTLINE |
Playable MP3 file standards
| Compatible standard | MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER 3) |
| Compatible sampling frequency |
|
| Compatible bit rate |
|
| Compatible channel mode | Stereo, joint stereo, dual channel, monaural |
Playable WMA file standards
| Compatible standard | WMA Ver. 7, 8, and 9 |
| Compatible sampling frequency | 32, 44.1, 48 (kHz) |
| Compatible bit rate |
|
ID3 tag and WMA tag
Additional textual information called ID3 tags can be input to MP3 files. Information such as song titles and artist names can be stored.
Additional textual information called WMA tags can be input to WMA files. Information such as song titles and artist names can be stored.
Usable media
Only CD-ROMs, CD-Rs (CD-Recordable), and CD-RWs (CD-ReWritable) can be used to play MP3/WMA files.
Usable media format
Usable media format
| Disc format | CD-ROM Mode 1, CD-ROM XA Mode 2 Form 1 |
| File format | ISO9660 Level 1 and Level 2 (Joliet, Romeo) |
Standard and restrictions
| Maximum directory levels | 8 levels |
| Maximum number of characters for a folder name/file name | 32 characters |
| Maximum number of folders | 192 (Including empty folders, route folders, and folders that do not contain MP3/WMA files) |
| Maximum number of files in a disc | 255 (Including non-MP3/WMA files) |
File names
Only files with an extension of ".mp3" or ".wma" can be recognized and played as MP3 or WMA files.
Save MP3 or WMA files with an extension of ".mp3" or ".wma".
| CASSETTE TAPE PLAYER MAINTENANCE |
Tape player / head cleaning:
![]() |
Raise the cassette door with your finger. Using a pencil or similar object, push in the guide.
Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.
CD cleaning:
If a disc is dirty, clean the disc by wiping the CD's underside radially with a soft cloth.
| AVC-LAN DESCRIPTION |
What is AVC-LAN?

Purpose:
Recently, car audio systems have rapidly developed and the functions have vastly changed. The conventional car audio system is being integrated with multi-media interfaces similar to those in navigation systems. At the same time, customers are demanding higher quality from their audio systems. This is merely an overview of the standardization background. The specific purposes are as follows:
To solve sound problems, etc. caused by using components of different manufacturers through signal standardization.
To allow each manufacturer to concentrate on developing products they do best. From this, reasonably priced products can be produced.
| COMMUNICATION SYSTEM OUTLINE |
Components of the audio system communicate with each other via the AVC-LAN.
The master component of the AVC-LAN is a radio receiver assembly with a 60 to 80 ? resistor. This is essential for communication.
If a short circuit or open circuit occurs in the AVCLAN circuit, communication is interrupted and the audio system will stop functioning.
| DIAGNOSTIC FUNCTION OUTLINE |
The audio system has a diagnostic function (the result is indicated on the master unit).
A 3-digit hexadecimal component code (physical address) is allocated to each component on the AVC-LAN. Using this code, the component in the diagnostic function can be displayed.
| DIAGNOSTIC TROUBLE CHART |
| Terms | Definitions |
| Physical address (component code) |
|
| Logical address | Two-digit code (in hexadecimals) given to each function and component unit in each component of AVC-LAN. |
190 (RADIO RECEIVER)
| DTC | Diagnostic Item | Diagnostic Content | Troubleshooting |
| D5*1 | Absence of Registration Unit | Component shown by sub code disconnected from system while ignition switch is ON or ACC. |
|
| D6 *1 | Absence of Master Component | With ignition switch to ACC or ON, code related component disconnected from system or master component. |
|
| D8 *2 | No Response to Connection Check | Component shown by sub code disconnected from system after engine start. |
|
| D9 *1 | Last Mode Error | With ignition switch to ACC or ON, audio or visual component that was operating when engine was stopped cannot connect. |
|
| DA | No Response to ON/OFF Instruction | No response when mode changed (audio and visual mode change). Sound and picture do not change by button operation. |
|
| DB *1 | Mode Status Error | Dual alarm detected. |
|
| DC *3 | Transmission Error | Transmission failure to component shown by sub code. (Detecting this DTC does not necessarily mean actual failure.) | If same sub code is recorded in another component, check harness of power supply and communication systems of all components shown by code. If not, delete DTCs and recheck. |
| DD *4 | Master Reset (Momentary Interruption) | Master component disconnected from system after engine start. |
|
| DE *4 | Slave Reset (Momentary Interruption) | Component shown by sub code disconnected from system after engine start. |
|
| E0 | Registration Completion Instruction Error | Registration Completion Instruction command from master component cannot be received. | Since this DTC is provided for engineering purposes, it may be detected when no actual failure exists. |
| E2 | ON / OFF Instruction Parameter Request Transmission | Error occurs in ON / OFF controlling command from radio receiver. | Replace radio receiver. |
| E3 | Registration Request Transmission | Registration Request command output from slave component. | Since this DTC is provided for engineering purposes, it may be detected when no actual failure exists. |
| E4 | Plural Frame Abort | Plural frame transmission aborted. | Since this DTC is provided for engineering purposes, it may be detected when no actual failure exists. |
| DTC | Diagnosis item | Diagnosis Content | Troubleshooting |
| 43 | AM Tuner Error | AM tuner is abnormal. | Replace radio receiver |
| 44 | FM Tuner Error | FM tuner is abnormal. | Replace radio receiver |
| DTC | Diagnosis item | Diagnosis Content | Troubleshooting |
| 40 | Mechanical or Media Error | Malfunction due to mechanical failure identified, or cassette tape cut or entangled. |
|
| 41 | EJECT Error | Cassette cannot be ejected. | Replace radio receiver |
| DTC | Diagnosis item | Diagnosis Content | Troubleshooting |
| 42 | No Disc Readout | Disc cannot be read. |
|
| 44 | CD Player Error | Error detected in CD player. |
|
| 45 | EJECT Error | Disc cannot be ejected. | Replace radio receiver. |
| 46 | Scratched / Reversed Disc | Scratches or dirt found on CD surface or CD set upside down. | Inspect CD. |
| 47 | Detection of High Temperature | High temperature detected in CD player. | Put vehicle in shade and allow it to cool down with ignition switch off, and then recheck for DTCs. If same DTC is detected, replace radio receiver. |
| 48 | Detection of Excess Current | Overcurrent detected in CD player. | Replace radio receiver. |
| DTC | Diagnosis item | Diagnosis Content | Troubleshooting |
| 42 | No Disc Readout | Disc cannot be read. |
|
| 44 | CD Player Error | Error detected in CD player. |
|
| 45 | EJECT Error | Magazine cannot be ejected. | Replace radio receiver. |
| 46 | Scratched / Reversed Disc | Scratches or dirt found on CD surface or CD set upside down. | Inspect CD. |
| 47 | Detection of High Temperature | High temperature detected in CD changer. | Put vehicle in shade and allow it to cool down with ignition switch off, and then recheck for DTCs. |
| 48 | Detection of Excess Current | Overcurrent detected in CD changer. | Replace radio receiver. |
| 51 | CD Changer Elevator Error | Mechanical error occurs during elevator operation. | Replace radio receiver. |
| 52 | CD Changer Clamp Error | Failure in disc clamping or clamp error. | Replace radio receiver. |
| "BLUETOOTH" OUTLINE |
"Bluetooth" is a trademark owned by Bluetooth SIG. Inc.
"Bluetooth" is a new wireless connection technology that uses the 2.4 GHz frequency band. This makes it possible to connect a cellular phone ("Bluetooth" compatible phone*) to the radio receiver assembly (the "Bluetooth" system is built-in) through the handsfree function of the cellular phone, even if it is in a pocket or bag. As a result, it is not necessary to directly connect the radio receiver assembly to the cellular phone.

| ASL (Automatic Sound Levelizer) FUNCTION OUTLINE |
The ASL (Automatic Sound Levelizer) function automatically adjusts the sound data in order to enable to hear the clear audio sound even when vehicle noise increases (as vehicle noise increases, the volume is turned up etc.). Vehicle speed signals are received from the combination meter and used for the ASL (Automatic Sound Levelizer).