Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > Radio Broadcast cannot be Received (Bad Reception)

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK WHETHER RADIO AUTO-SEARCH FUNCTIONS PROPERLY
  1. Check whether the radio auto-search functions properly.

    1. Tune the radio using the auto-search function and check that it operates normally.

      OK:
      The radio auto-search functions properly.



NG
Go to step 2
OK

END 

2.CHECK OPTIONAL COMPONENTS
  1. Check whether any optional components, such as telephone antenna, are installed.

    OK:
    Optional component(s) installed.



NG
Go to step 3
OK

EFFECT FROM OPTIONAL COMPONENTS 

3.INSPECT RADIO RECEIVER (ANTENNA)


    E108381
  1. Remove the antenna plug of the radio receiver.

  1. With the radio receiver connector connected, turn the ignition switch to ACC.

  1. Turn on the radio and select the AM mode.

  1. Place a flat-head screwdriver or piece of metal, such as a thin wire, on the antenna jack of the radio receiver. Check that noise is heard from the speakers.

    OK:
    Noise occurs.



NG
REPLACE RADIO RECEIVER
OK

CHECK ANTENNA SYSTEM