Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

HINT:
The sound may skip when driving on an unpaved road.

1.CLEAN CD


    E050013
  1. If the disc is dirty, clean the disc by wiping the CD's dataside radially with a soft cloth.

    OK:
    Malfunction disappears.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
Go to step 2
OK

CD WAS DIRTY 

2.REPLACE CD
  1. Replace the CD with a normal one and check if the same problem occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 3
OK

CD IS FAULTY 

3.CHECK RADIO RECEIVER INSTALLATION
  1. Check the installation condition of the radio receiver.

    OK:
    Installed properly.



NG
INSTALL RADIO RECEIVER PROPERLY
OK


4.CHECK WHETHER RAPID TEMPERATURE CHANGE OCCURRED IN CABIN
  1. Check whether or not a rapid temperature change occurred in the cabin.

    OK:
    Rapid temperature change occurred.

    HINT:
    Rapid temperature changes create condensation inside the CD player, which may prevent CDs from being played.



NG
REPLACE RADIO RECEIVER
OK

CONDENSATION DUE TO TEMPERATURE CHANGE (LET IT SIT FOR A WHILE BEFORE USING)