Home › BODY ELECTRICAL › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK DOOR LOCK FAIL-SAFE
  1. When a malfunction in the door control switch (for front driver door side) or door control switch (for center console side*) or driver side door key cylinder is detected, the door lock/unlock operation is disabled.
    *: Hatchback



2. CHECK ELECTRICAL DOOR LOCK OPERATION
  1. Check that all doors are locked and unlocked in accordance with the door control switch (for front driver door side) or door control switch (for center console side*) operation.
    *: Hatchback

  1. Check that all doors are locked and unlocked when the following operations are performed: 1) turn the driver side door key cylinder to the lock and unlock positions using the key, and 2) turn the front passenger side door key cylinder to the lock and unlock positions using the key.

    HINT:
    Doors cannot be locked or unlocked using the key when the ignition switch to ON and the driver seat belt is fastened.

  1. Check the key lock-in prevention function.

    NOTICE:
    Perform this operation with the driver door window open to prevent the key from being locked inside the vehicle.


    1. Insert the ignition key into the ignition key cylinder (for vehicles without the entry and start system), or place the transmitter inside the vehicle (for vehicles with the entry and start system).

    2. Check that all doors are immediately unlocked when the driver side door lock knob is turned to the lock position with the driver door open.

    3. Check that all doors are immediately unlocked when the door control switch (for front driver door side) or door control switch (for center console side*) is turned to the lock position with the driver door open.
      *: Hatchback

    4. Check that all doors are unlocked when the driver door is closed after the driver door lock knob is held in the lock position for 2 seconds with the driver door open.

  1. Check the key-linked lock and unlock function.

    1. Check that the doors cannot be locked or unlocked using the key from outside the vehicle when the ignition switch to ON and the driver seat belt is fastened.