DTC U0129 Lost Communication with Skid Control ECU |
| DTC No. | DTC Detecting Conditions | Trouble Areas |
| U0129 | When either of following conditions detected:
|
|

| 1.CONFIRM DTC OUTPUT |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON (do not start the engine) and turn the tester on.
Clear the stored DTCs by selecting the following menu items on the tester: Body/ Combination Meter/ DTC /Clear.
Start the engine and wait for at least 60 seconds.
Check for DTCs.
| Result | Proceed to |
| DTC output | A |
| DTC not output | B |
|
| ||||
| A | ||
| ||