Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › SEAT BELT

SEAT BELT > SERVICE DATA



OCCUPANT DETECTION SENSOR (for Sedan): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 3
More than 29 N (3 kgf, 7 lbf) applied to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher

OCCUPANT DETECTION SENSOR (for Hatchback): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 3
More than 29 N (3 kgf, 7 lbf) applied to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher

FRONT SEAT INNER BELT ASSEMBLY (for Sedan Driver Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 2
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω

FRONT SEAT INNER BELT ASSEMBLY (for Sedan Front Passenger Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
A1 - B3
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
A2 - B1
Always
Below 1 Ω

FRONT SEAT INNER BELT ASSEMBLY (for Hatchback Driver Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 2
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω

FRONT SEAT INNER BELT ASSEMBLY (for Hatchback Front Passenger Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
A1 - B3
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
A2 - B1
Always
Below 1 Ω