Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > Tape is Tangled due to Incorrect Tape Speed or Auto-Reverse Malfunction

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK FOR FOREIGN OBJECT
  1. Check that the radio receiver cassette tape player is free from foreign objects.

    OK:
    No foreign objects.



NG
REMOVE FOREIGN OBJECT
OK


2.REPLACE CASSETTE TAPE
  1. Replace the cassette tape with a normal one (90 minutes or less). Check if the same problem occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 3
OK

CASSETTE TAPE IS FAULTY 

3.CLEAN HEAD


    I100153E05
  1. Raise the cassette door with your finger. Using a pencil or a similar object, push in the guide.

  1. Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.

  1. Check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

HEAD WAS DIRTY