Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › CLUTCH

CLUTCH > SERVICE DATA



Pedal height from dash panel (for LHD)
2NZ-FE
1NZ-FE
118.1 to 128.1 mm (4.650 to 5.043 in.)
133 to 143 mm (5.236 to 5.630 in.)
Pedal height from dash panel (for RHD)
-
144.4 to 154.4 mm (5.685 to 6.079 in.)
Pedal free play
-
5.0 to 15.0 mm (0.197 to 0.591 in.)
Push rod play at pedal top
-
1.0 to 5.0 mm (0.039 to 0.197 in.)
Clutch release point from pedal full stroke end position
-
25 mm (0.98 in.) or more
Clutch disc rivet depth
Minimum
0.3 mm (0.012 in.)
Clutch disc runout
Maximum
0.8 mm (0.031 in.)
Diaphragm spring fingerwear
Maximum depth
Maximum width
0.5 mm (0.020 in.)
6.0 mm (0.236 in.)
Flywheel runout
Maximum
0.1 mm (0.004 in.)
Diaphragm spring tip non-alignment
Maximum depth
0.5 mm (0.020 in.)
Clutch start switch resistance
ON (pushed in)
OFF (released)
Blow 1Ω
10 kΩ or higher